Coverage for product breakdowns and malfunctions
24/7 customer support
Free shipping on all repairs with no deductibles or hidden fees
Fully transferable with gifts. Cancel anytime, full refund in the first 30 days
If you purchase this service plan and eligible product for this service plan, you acknowledge that Amazon may send the service plan seller relevant product and price information for the purpose of administering the plan
Every studio, be it a professional recording studio or just a home studio, needs a good set of monitor speakers, with a flat frequency response so you can hear exactly what the recording will sound like. If this describes your own needs, then you should get a pair of these 5-inch Powered Studio Monitor Speakers from Monoprice! Speaker Type: 2-way Near-Field Studio Reference Monitor Speakers LF Amplifier: 40 watts continuous HF Amplifier: 30 watts continuous Input Connections: 1 XLR connector for balanced connections and 1 TRS connector for balanced and unbalanced TRS and TS connections Input Impedance: 10k ohms unbalanced, 20k ohms balanced Sensitivity: 90dBA output SPL at 1 meter with 85mV pink noise input Woofers: 5" Kevlar cone with high-temperature voice coil and magnetic shielding Tweeters: 1" silk dome with magnetic shielding Frequency Response: 56 Hz ~ 22 kHz Crossover Frequency: 3000Hz S/N Ratio: > 100dB (typical, A-weighted) HF Level: Switchable, -2dB, -1dB, Flat, or +1dB boost to frequencies above 2000 Hz Power Requirements: 100 ~ 120 VAC, 50/60 Hz Power Cable: IEC 60320 C13 to NEMA 5-15 Dimensions (HxWxD): 10.0" x 6.9" x 7.8" (254 x 176 x 198 mm) each Weight: 9.7 lbs (4.4 Kg) each
These speakers are professional quality studio monitors, designed to produce a flat frequency response for studio recording, mixing, and mastering duties. Each speaker is separately powered, is bi-amped with two dedicated amplifiers, and uses both balanced XLR and balanced/unbalanced TRS/TS audio input paths.
The tweeter is a 1" silk dome design with magnetic shielding for a flat frequency response and accurate musical reproduction. The woofer is a 5" DuPont Kevlar fiber cone with magnetic shielding, rubber surround, and a high-temperature voice coil, for long hours of high volume work.
Each monitor enclosure includes two separate power amplifiers totaling 70 watts of music power. A 30 watt amplifier is used to drive the tweeter, while a 40 watt amp drives the woofer. This use of dual amplifiers ensures that each driver has the power it needs without compromising the output of the other driver, ensuring that the audio output remains crisp, clean, loud, and distortion free at all times.
A four-position selector switch on the back of each speaker allows you to adjust the high-frequency bias, with either a -2dB, -1dB, Flat, or +1dB shelving of frequencies above 3000 Hz. The purpose of this circuitry is to adjust the high-frequency response to the characteristics of the room being used. In a "bright" musical environment, an attenuation of the high frequencies is needed to produce a flat frequency response, while a more sound absorbent environment may require a boost of the high-frequencies to achieve a flat overall response.
Monoprice Stage Right 5-inch Powered Studio Multimedia Monitor Speakers (pair) - (605500) - B00DIGC5NS